Home

News

Forums

Hardware

CPUs

Mainboards

Video

Guides

CPU Prices

Memory Prices

Shop



Sharky Extreme :


Latest News


- Patriot Updates their DDR2 4GB PC2-8500 Line to "Revision 2"
- Mushkin Releases a New Line of Ascent Redline and XP eVCI-cooled Memory
- OCZ Hits 2.0 GHz using High-Density 2GB DDR3 Modules
- Dell Raises the Bar with Quad-CPU/Quad-Graphics XPS 730 H2 and H2C Gaming Systems
- Kingston Unleashes Low-Latency 800MHz HyperX FB-DIMMs for the Skulltrail
News Archives

Features

- SharkyExtreme.com: Interview with Microsoft's Dan Odell
- SharkyExtreme.com: Interview with ATI's Terry Makedon
- SharkyExtreme.com: Interview with Seagate's Joni Clark
- Half-Life 2 Review
- DOOM 3 Review

Buyer's Guides

- March Extreme Gaming PC Buyer's Guide
- January High-end Gaming PC Buyer's Guide
- November Value Gaming PC Buyer's Guide

HARDWARE

  • CPUs

    - AMD Phenom X3 8750 Review
    - Intel Core 2 Duo E8500 Review
    - AMD Phenom X4 9850 Black Edition Review
    - Back in Black: Phenom 9600 Black Edition Review

  • Motherboards

    - AMD 780G Chipset Review

  • Video Cards

    - ASUS EN8800GT TOP 512MB Review
    - Gigabyte GeForce 8800 GT 512MB Review
    - PNY XLR8 GeForce 8800 GTS 512MB Review





  • The recipient of our affections will be the new Celeron 700MHz CPU - Intel's fastest value processor available. Priced at around $195, speed comes fairly inexpensively, and since our i815E systems make use of PC133 memory, we won't have to worry about pricey RDRAM to achieve top-notch performance either. Additionally, we've found the FSB of Intel's i815E to be rather lenient for overclocking so we've selected ASUS' CUSL2 as our Celeron benchmarking platform.

    The Celeron II line of value CPUs have their Level 2 cache built onto the processor die, meaning cache frequency dividers are a nuisance of the past. Since the SRAM chips on older Slot-based CPUs have always posed a problem to the overclocking community, we are naturally happy to see them go. In addition, the .18-micron process of the Celeron II means that we'll be dealing with low-voltage cores.

    Note: For most of the boards on the market, Front Side Bus changes are made in the BIOS, while a few others utilize DIP switches on the PCB itself. It is important to have a solid grasp on BIOS functions, because it is possible to fry a CPU with a wrong setting. Also, be advised that Intel doesn't recommend overclocking and a voided warranty is a definite consequence. At the same time, recognize that only certain settings can damage your equipment, while others will just result in crashes.





    Copyright © 2002 INT Media Group, Incorporated. All Rights Reserved. About INT Media Group | Press Releases | Privacy Policy | Career Opportunities